Instructions
These instructions may not work for Android 12.
Starting in May 2022, users with the Android 12 operating system may experience issues accessing ArgoAir.
Users with Android 12 should visit the ITS Help Desk in Building 79 during our front counter hours, for assistance.
To check which version of Android you have:
- Access your general settings.
- Click the search bar and type in version.
- Click Android version.
Step 1
From the Home Screen, navigate to the Settings icon.
Step 2
In the Settings menu, select the Wi-Fi option.
Step 3
In the Wi-Fi menu, make sure the switch next to Wi-Fi is turned on.
Step 4
Under Wi-Fi networks, select uwf-argo-air.
Step 5
Once uwf-argo-air is selected, a menu should be displayed. The proper configuration for each field is as follows:
- The EAP method field should be set to PEAP.
- The Phase 2 authentication field should be set to MSCHAPV2.
- The CA certificate field should be set to Do not validate or (unspecified).
- For some Android 11 users, your device may only allow the option Use system certificates and will then prompt you to enter a domain.
- The Domain field should be set as uwf.edu.
- The Domain field should be set as uwf.edu.
- For some Android 11 users, your device may only allow the option Use system certificates and will then prompt you to enter a domain.
- The Identity field should be set as your ArgoNet username.
- The Anonymous identity field should remain blank.
- The Password field will be your ArgoNet password.
Step 6
Select the Connect option in the lower right-hand corner of the menu. The device will now connect to ArgoAir.
Forgetting the Network
If you need to forget the network to re-connect please see the following guide:
Step 1
From the Home Screen, navigate to the Settings icon.
Step 2
In the Settings menu, select the Wi-Fi option.
Step 3
Under Wi-Fi networks, select MORE SETTINGS.
Step 4
Click uwf-argo-air, then click FORGET.
