Instructions

Starting in May 2022, users with the Android 12 operating system may experience issues accessing ArgoAir.

Users with Android 12 should visit the ITS Help Desk in Building 79 during our front counter hours, for assistance.

To check which version of Android you have:

Step 1

From the Home Screen, navigate to the Settings icon.

Step 2

In the Settings menu, select the Wi-Fi option.

WiFi option in Settings menu

Step 3

In the Wi-Fi menu, make sure the switch next to Wi-Fi is turned on.

Step 4

Under Wi-Fi networks, select uwf-argo-air.

uwf-argo-air WiFi signal

Step 5

Once uwf-argo-air is selected, a menu should be displayed. The proper configuration for each field is as follows:

EAP method, Phase 2 authentication, and CA certificate settings Identity, Anonymous identity, and Password settings

The EAP method field should be set to PEAP.
The Phase 2 authentication field should be set to MSCHAPV2.
The CA certificate field should be set to Do not validate or (unspecified).
- For some Android 11 users, your device may only allow the option Use system certificates and will then prompt you to enter a domain.
  - The Domain field should be set as uwf.edu.
The Identity field should be set as your ArgoNet username.
The Anonymous identity field should remain blank.
The Password field will be your ArgoNet password.

Step 6

Select the Connect option in the lower right-hand corner of the menu. The device will now connect to ArgoAir.

Forgetting the Network

If you need to forget the network to re-connect please see the following guide:

Step 1

From the Home Screen, navigate to the Settings icon.

Step 2

In the Settings menu, select the Wi-Fi option.

WiFi option in Settings menu

Step 3

Under Wi-Fi networks, select MORE SETTINGS.

More settings option

Step 4

Click uwf-argo-air, then click FORGET.

Forget option