Instructions

Step 1

From the Home Screen, navigate to the Settings icon.

Step 2

In the Settings menu, select the Wi-Fi option.

Step 3

In the Wi-Fi menu, make sure the switch next to Wi-Fi is turned on, then click on the drop down arrow. 

Step 4

Under Wi-Fi networks, select uwf-argo-air.

Step 5

Once uwf-argo-air is selected, a menu should be displayed. The proper configuration for each field is as follows:

• The EAP method field should be set to PEAP.
• The Phase 2 authentication field should be set to MSCHAPV2.
• The CA certificate field should be set to (unspecified).
• The Identity field should be set as your ArgoNet username.
• The Anonymous identity field should remain blank.
• The Password field will be your ArgoNet password.

Step 6

Select the Connect option in the lower right-hand corner of the menu. The device will now connect to ArgoAir.