Instructions

Step 1

From the Home Screen, navigate to the "Settings" icon.

Step 2

In the "Settings" menu, select the "Wi-Fi" option.

Step 3

In the "Wi-Fi" menu, at the top of the screen, make sure that the switch next to "Wi-Fi" is tuned On.

Step 4

Under "Wi-Fi Networks," select uwf-argo-air.

Step 5

Once "uwf-argo-air" is selected, a menu should be displayed. The proper configuration for each field is as follows:

• The EAP method field should be set to PEAP.
• The Phase 2 authentication field should be set to MSCHAPV2.
• The CA certificate field should be set to (unspecified).
• The Identity field should be set as the ArgoNet Username.
• The Anonymous identity field can remain blank.
• The Password field will be the ArgoNet Password.

Step 6

Select the "Connect" option in the lower right hand corner of the menu. The device will now connect to ArgoAir.