You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 13 Next »

Instructions

Step 1

From the Home Screen, navigate to the Settings icon.

 

Step 2

In the Settings menu, select the Wi-Fi option.

Step 3

In the Wi-Fi menu, make sure the switch next to Wi-Fi is turned on.

 

Step 4

Under Wi-Fi networks, select uwf-argo-air.

 

Step 5

Once uwf-argo-air is selected, a menu should be displayed. The proper configuration for each field is as follows:

  • The EAP method field should be set to PEAP.
  • The Phase 2 authentication field should be set to MSCHAPV2.
  • The CA certificate field should be set to (unspecified).
  • The Identity field should be set as your ArgoNet username.
  • The Anonymous identity field should remain blank.
  • The Password field will be your ArgoNet password.

 

Step 6

Select the Connect option in the lower right-hand corner of the menu. The device will now connect to ArgoAir.

 

  • No labels