Connecting to ArgoAir

Step 1

From the Home Screen, navigate to the

Settings

icon.

Step 2

In the

Settings

menu, select the

Wi-Fi

option.

Image Modified

Step 3

In the

Wi-Fi

menu,

make sure

the switch next to

Wi-Fi

is

turned on.

Step 4

Under

Wi-Fi

networks,

select uwf-argo-air.

Image Modified

Step 5

Once

uwf-argo-air

is selected, a menu should be displayed. The proper configuration for each field is as follows:

Image ModifiedImage Modified

• The EAP method field should be set to PEAP.
• The Phase 2 authentication field should be set to MSCHAPV2.
• The CA certificate field should be set

• to Do not validate or (unspecified). 
  • For Android 11 and 12 users, your device may only allow the option Use system certificates and will then prompt you to enter a domain.
    
    • The Domain field should be set as uwf.edu.
      Image AddedFor some Android 11 users, you may be asked to input a domain.
• The Identity field should be set

• as your ArgoNet username.
• The Anonymous identity field

• should remain blank.
• The Password field will

• be your ArgoNet

• password.

Step 6

Select the

Connect

option in the lower right-hand corner of the menu. The device will now connect to ArgoAir.

Forgetting the Network 

When users change their passwords, they'll need to forget the network, to re-connect to ArgoAir.

Step 1

From the Home Screen, navigate to the Settings icon.

Step 2

In the Settings menu, select the Wi-Fi option.

Image Added

Step 3

Under Wi-Fi networks, select MORE SETTINGS.

Image Added

Step 4

Click uwf-argo-air, then click FORGET.

Image Added