Overview

Hardware Standards

Microphones

• Wireless micro headset microphone
• Ceiling-mounted array microphone
• 18" Lectern-mounted cardioid microphone

Audio playback devices

• Classroom speakers 
• Wireless earbud headphones

Peripherals

• Lectern PC 
• SMART Podium with pen
• Crestron touch panel
• Document camera
• Blu-Ray player
• Projector (74/109)
• 1 86" Display (FWB 4/460)
• Cisco video conference system
• 2 65" video conference displays (74/109)
• 2 75" video conference displays (FWB 4/460)

Software Standards

• Windows 10 Operating System
• Microsoft Office 2019
• SMART Notebook 19 (Basic Mode)
• Turning Point TurningPoint (Clickers)
• Chrome (recommended), Edge, and Internet Explorer Browsers
• VLC Media Player
• Panopto
• Cisco Webex Meetings
• Google Drive File Streamfor Desktop
• Foxit Reader

Instructions

Activating the System

Step 1

Touch the Crestron Touch Panel to wake system. Touch again on the Touch to Begin page.

Image Modified

Step 2

Select Start under Video Conference Mode to use VTC functionality. Otherwise, select Start under Local Mode if utilizing room as a standard eClassroom.

Image Modified

Video Conference Mode

Wait for the system to initialize. The following should occur automatically:

• Cameras, Displays, and Projector will turn on.
• The projector screen will lower.

Once the system has initialized, the following screen will display:

Image Modified

Dialing a Room

Step 1

1. Select the room your course is paired with in the Directory pane
   1. Typically 74/109 is paired with FWB 4/460. Instructors may find their paired classrooms in Classmate via MyUWF.
2. Select Dial. 

Image Modified

Step 3

Press Dial to initiate the connection. Wait for both rooms to connect. Once the rooms are connected, you should see the video feed from the remote camera on each display.

Image Modified

Adjusting Microphone Settings

Step 1

Press Mics button on left side of touch panel.

Add screenshotImage Added

Step 2

Adjust volume sliders for each mic respectively. Confirm with remote facilitators if mic levels are adequate (if necessary).

Image Added

Image Removed

Muting All Outgoing Audio

Outgoing audio during a call may be muted for room privacy.

Image Added

1. Select the microphone button under Mic Mute.

Adjusting Volume

Image Added

1. Adjust the VTC Volume slider to adjust the audio volume

1. coming from the

1. remote classroom.
2. Adjust the VTC Room Volume slider to adjust the volume

1. devices in the local room (such as the Blu-Ray player,

1. lectern PC, or laptop).
   Image Removed
   1. 1. The room may also be muted by pressing the Mute button below the VTC Room Volume slider.

   Adjusting Camera Settings

   Each room has a camera control section.  These settings allow the instructor to adjust the camera position, zoom, and presenter tracking. Furthermore, each room can control the cameras of its paired room remotely. This means you can remotely control the cameras that are located in FWB and vice-versa. 

   Instructor Camera - Located at back of classroom (facing the instructor).

   Student Camera - Located at front of classroom (above the instructor).
   

   Press the Near End Control  button and select a camera to adjust the local camera’s position, zoom, and presenter tracking option.
   

   Press the Far End Control button and select a camera to adjust the remote camera’s position, zoom, and presenter tracking option.

   Image Removed

   Adjusting View Settings

   Image Removed

   The Presentation (1) button will display the selected Presentation source (2) when turned on. 

   Add screenshots and numbering for easy identification

   The Self-Vew (1) button will allow the instructor to view their own camera’s video feed on each display in the room. 

    

   Image Added

   1. Select Far-End Control to control the remote camera.
      or select Near-End Control to control the local camera.
   2. Select Instructor Camera to control the camera at the back of the classroom facing the instructor.
      or select Student Camera to control the camera at the front of the classroom facing the students.
   3. Use the Zoom controls to zoom the selected room camera in or out.
   4. Use the directional pad to pan and tilt the selected room camera left, right, up, or down.
   5. See the Presenter Tracking section below for more information.

   Using Presenter Tracking

   Presenter tracking works by tracking a moving individual across the front of a classroom. This does not physically pan the camera, rather the system digitally zooms and crops the image to focus on the tracked individual. Only one individual may be tracked at a time and the individual must remain within the tracking zone or they will need to return to the tracking set point for presenter tracking to resume. Use presenter tracking with the steps below:

   1. Ensure only the presenter is standing at the center of the lectern (presenter tracking setpoint).
   2. Select Presenter Tracking from the Video Conference Controls.
   3. Verify the camera is tracking via Self-View in the section below.

   Adjusting View Settings

   Image Added

   1. The Presentation button, when On, will display the selected Presentation Source on the local and remote projectors.
   2. The Self-View button, when On, will place the local camera feed on each wall display of the local room.
      1. When this is enabled, the Change-Layout button is displayed. After each press, this allows the self-view window position to be adjusted.
   
   Add a screenshot/photo of the self-view window in a different place

   Preview and Presentation Sources

   Image Added

   Preview Sources - Sources that are sent to the Lectern’s SMART Monitor:

   • VTC1 - Display VTC of local classroom.
   • VTC2 - Display VTC of other remote classroom.
   • PC - Lectern PC
   • Laptop - External Laptop or HDMI capable device.

   Presentation Sources - Sources that are sent to the Projector:

   • PC - Lectern PC
   • Laptop - External Laptop or HDMI capable device.
   Image Removed
   • Doc Cam - Document Camera located in the lectern drawer.

   Disconnecting or Ending a Call

   Image Added

   1. Select 
   Disconnect 
   1. Hangup to end a video conference call.

   Shutting Down the System or Switching Modes

   Step 1

   Image Added

   1. Press Shut Down in the top right corner of the touch panel.
   Image Removed

   Step 2

   Image Added

   1. Press Yes to confirm shut down
   or 
   1. 
      Or
   2. Press Start to switch
   modesImage Removed
   1. to an alternate mode

   Step 3

   Wait for the system to shut down. The following should occur automatically:

   • Cameras, Displays, and Projector will turn ofoff.
   • The projector screen will raise.

   Facilitator Responsibilities

   Facilitators are recommended to follow the guidelines below to ensure a quality experience for instructors and students.

   Contributors

   Interested Parties
   • Arrive early: 15 minutes before class starts to verify room operations
   • Be ready: To aid with issues or answer instructor questions
     
   • Report issues: Troubleshoot and resolve or notify the appropriate support

   Pages on this topic

   
   

   Include Page
   ILP:_Help Desk Footer ILP:_Help Desk Footer