Instructions
...
Step 1
From the Home Screen, navigate to the "Settings" icon.
Step 2
In the "Settings" menu, select the "Wi-Fi" option.
Step 3
In the "Wi-Fi" menu, at the top of the screen, make sure that the switch next to "Wi-Fi" is tuned On.
Step 4
Under "Wi-Fi Networks," select uwf-argo-air.
Step 5
Once "uwf-argo-air" is selected, a menu should be displayed. The proper configuration for each field is as follows:
- The EAP method field should be set to PEAP.
- The Phase 2 authentication field should be set to MSCHAPV2.
- The CA certificate field should be set to (unspecified).
- The Identity field should be set as the ArgoNet Username.
- The Anonymous identity field can remain blank.
- The Password field will be the ArgoNet Password.
Step 6
Select the "Connect" option in the lower right hand corner of the menu. The device will now connect to ArgoAir.
(Enter text here)