Overview

Instructions

Features

Microphones

• Wireless Lapel Mic
• Ceiling-mounted Mic
• Lectern Mic

Audio playback devices

• Classroom Speakers 
• Wireless lapel headphones

Peripherals

• Lectern PC 
• SMART Monitor
• Document camera
• Blu-Ray player
• Projector

Activating the System

Step 1

Touch the Crestron Touch Panel to wake system. Touch again on the Touch to Begin page.

Step 2

Select Video Conference Mode to use VTC functionality. Otherwise, select Local Mode if utilizing room as a standard eClassroom.

Step 3

Wait for system to initialize and bring you to the main interface page. Both displays at the front and back of the room should turn on, the projector should turn on, and the projector screen should lower. 

Dialing a Room

Step 1

Select the room your course is paired with in the directory pane.

Step 2

Verify room is correct. Select Dial.

Step 3

Press Dial to initiate the connection. Wait for both rooms to connect. Once the rooms are connected, you should see the video feed from the FWB camera on each display.

Adjusting Microphone Settings

Step 1

Select Mics button on left side of touch panel.

Step 2

Adjust volume sliders for each mic respectively. Confirm with remote facilitators if mic levels are adequate (if necessary).

Adjusting Volume

Adjust the VTC Volume slider to adjust the audio volume of the sound being transmitted from the FWB side.

Adjust the VTC Room Volume slider to adjust the volume of local devices in the room (blu-ray player, lectern PC).

Image Added

Adjusting Camera Settings

Each room has a camera control section which enabled the user to adjust camera position, zoom, and presenter tracking. Furthermore, each room can control the cameras of its paired room remotely. This means you can remotely control the cameras that are located in FWB and vice-versa. 

Instructor Camera - Located at back of classroom (facing the instructor).

Student Camera - Located at front of classroom (above the instructor).

Press the Near End Control  button and select a camera to adjust the local camera’s position, zoom, and presenter tracking option.

Press the Far End Control button and select a camera to adjust the remote camera’s position, zoom, and presenter tracking option.

Adjusting View Settings

The Presentation On/Off button will either display the Lectern PC (On) or the VTC system of the room (Off).

The Self-view button will allow the instructor to view their own camera’s video feed on each display in the room. 

When this is enabled, the Change-Layout button is displayed. After each press, this allows the self-view window position to be adjusted.

Preview and Presentation Sources

Preview Sources - Sources that are sent to the Lectern’s SMART Monitor.

• VTC1 - Display VTC of local classroom.
• VTC2 - Display VTC of other classroom.
• PC - Lectern PC
• Laptop - External Laptop or HDMI capable device.

Presentation Sources - Sources that are sent to the Projector 

• PC - Lectern PC
• Laptop - External Laptop or HDMI capable device.

Shutting Down the System

Step 1

Press Shut Down in the top right corner of the main interface.

Step 2

Press Yes to confirm.

Step 3

Verify that the projector screen raises, both displays turn off, and the projector turns off.

Image Added

FAQs

Previous/Next Steps

(Enter text here)

Contributors

Interested Parties